Before cutting, the layout of down jacket should be drawn according to the template. “Integrity, rationality and economy” is the basic principle of layout.
The main technological requirements in the cutting process are as follows:
1. Check the quantity when dragging materials, and pay attention to avoid defects.
2. Different batches of dyed or sand-washed fabrics should be cut in batches to prevent the same garment from color difference. If a piece of cloth has color difference, it should be typeset with color difference.
3. Pay attention to the straightness of the fabric and whether the trend of clothing strands meets the technological requirements. Suitable for the depth of pile fabric (such as fleece, velvet, corduroy, etc.
4. For striped fabrics, attention should be paid to the alignment and positioning of stripes in each layer when dragging materials to ensure the consistency and symmetry of stripes on clothing.
5. Cutting requires accurate cutting and smooth lines. The paving pattern should not be too thick, and the upper and lower layers of the fabric are not skewed.
6. Mark the cutting edge according to the template alignment.
7. Care should be taken not to affect the appearance of clothing when using the cone hole marking. After cutting, count the test pieces, bundle them into a pile according to the clothing specifications, and attach a ticket, indicating the model, location and specifications.
Post time: Apr-17-2023